Dyson Airblade Tap

The truth about hygiene

“Dyson AirbladeTM hand dryers are proven to be hygienic by university and expert industry research.”

sign

James Dyson - Chief Engineer

jyson

No waste water on the floor

With Airblade™ hand drying technology in a tap, hands can be dried at the sink in just 12 seconds. There's no need for users to move to a separate drying area, so no water is dripped on the floor.

Free up your washroom

Other hand drying methods take up valuable wall and floor space. With the Dyson Airblade Tap hand dryer, there's room for extra toilet cubicles and other facilities.

Image is not available
Image is not available

Airblade™ hand drying technology in a tap

Every second, up to 35 litres of air are forced through apertures up to 0.8 mm wide. The result – 690km/h sheets of air that scrape water from hands, drying them hygienically in just 12 seconds.

Arrow
Arrow
Slider

Saves you money

The Dyson Airblade Tap hand dryer costs an average of just $48 to run for a year. That's up to 69% less than other hand dryers, and up to 97% less than paper towels (see calculations).

$43
per year
to run
$157
per year
to runsave-img2
$1,460
per year
to runsave-img3
Dyson Airblade tab
Paper towels
Other hand dryers
4.0Grams
13.9Grams
15.6Grams
 
05101520
CO2 produced per dry (grams)

Cuts your carbon footprint

The Dyson Airblade Tap hand dryer has a lower environmental impact than other hand drying methods. It produces 4.0g of CO2 per dry - up to 74% less than other hand dryers and up to 71% less than paper towels (see calculations).

 
Image is not available

Eases washroom congestion

The Dyson Airblade Tap hand dryer takes 12 seconds to dry hands completely. So users spend less time in the washroom, and busy periods are easier to manage.

Image is not available

Dyson digital motor technology

The Dyson digital motor V4 is one of the world's smallest fully-integrated 1600W motors. It spins 90,000 times a minute, generating the power that makes Airblade™ technology possible.

Arrow
Arrow
Slider

Image is not available

Dries hands with clean air

Dyson Airblade Tap hand dryers uses a HEPA filter that captures 99.9% of particles the size of bacteria and viruses from the air used to dry hands. So hands are dried with cleaner air, not dirty air.

Image is not available

HEPA filtration

The HEPA filter removes airborne particles from the air. It has a grille to capture larger debris, a fleece layer to capture fluff and fibres, and a pleated HEPA media to capture particles as small as 0.1 microns.

Arrow
Arrow
PlayPause
Slider

play

"Our mission is simple. We solve the problems others seem to ignore."

Chief engineer - James Dyson

Points to consider before installation

Each Dyson Airblade Tap hand dryer requires the following supply and fit specification.For more information, please download our installation advice brochure.

Download Brochure

Environment

Dry, indoor environments only. Maximum operating elevation 2000m.

Electrical supply

Correct power available to the appliance (HV 220-240v 1600)

Water supply

Water pressure between 1-8 bar. Pipe thread 1/2” BSP.

Location of Motor bucket

Minimum 100mm distance between floor and motor bucket. AB11 must use metal enclosure as supplied.

Have you got the right
type of sink?

Click the link below to contact us for the right solution.

Contact Us

Image is not available

Dyson Airblade Tap Wall hand dryer dimensions

For more information on machine dimensions, electrical supply and construction materials, download the technical specification.

Image is not available

Dyson Airblade Tap Wall hand dryer installation

Find out recommended mounting heights, clearance distances and more installation information by downloading the technical specification.

Arrow
Arrow
Slider

Image is not available

Dyson Airblade Tap Short hand dryer dimensions

For more information on machine dimensions, electrical supply and construction materials, download the technical specification.

Image is not available

Dyson Airblade Tap Short hand dryer installation

Find out recommended mounting heights, clearance distances and more installation information by downloading the technical specification.

Arrow
Arrow
Slider

Image is not available

Dyson Airblade Tap Long hand dryer dimensions

For more information on machine dimensions, electrical supply and construction materials, download the technical specification.

Image is not available

Dyson Airblade Tap Long hand dryer installation

Find out recommended mounting heights, clearance distances and more installation information by downloading the technical specification.

Arrow
Arrow
Slider

Only Dyson Airblade™ hand dryers have all these benefits

Fast

Hands are dried in 10-12 seconds.

Most hygienic

HEPA filters as standard.

Cost less to run

69% less than other hand dryers.

Environment friendly

Lower CO2 emissions, no paper waste.

5 year guarantee

Parts and labour.